About Tag Module
The Tag Module makes it possible to connect up to six HARDWARIO tags. There are two independent I²C buses (I2C0 and I2C1) - one on each side.
Two independent I²C buses allow the connection of two tags with the same I²C address to a single HARDWARIO TOWER node. This is impossible without the Tag Module.
It also features pull-up resistors on SDA/SCL signals of the I2C1 bus.
- 6x 5-pin socket position for HARDWARIO TOWER tags
- 3x tag positions are connected to I2C0 (right side)
- 3x tag positions are connected to I2C1 (left side)
- Integrated pull-up resistors on SDA/SCL signals of I2C1 bus
- Operating temperature range: -20 to 70 °C
- Mechanical dimensions: 44 x 55 mm