Skip to main content

Templates: create, share, edit, and apply

A template is a reusable configuration preset — capture once, apply to many. Templates carry only shareable settings; per-device identity and secrets (serial, LoRaWAN keys and EUIs, session keys) are intentionally left out so a template is safe to reuse across devices.

The Templates list

Create a template​

Go to Sticker → Templates → New and choose a source:

  • From a device — read a STICKER and capture its current settings.
  • Create manually — build one from scratch.
  • From hex — paste a template's hex string.
  • From a QR code — scan a shared template.
New template — choosing a source

If you build one manually, give it a name and set values in any category — a category left empty isn't saved — then Save.

Building a template manually

You can also save the configuration you are editing with Configuration → Save as template, or build one in a browser with the Template Generator.

Edit a template​

Open a template and choose Edit values to change what it carries.

Editing a template's values

Apply a template​

Open a template and choose how to write it:

  • Apply over NFC — read the device, review the changes, then write.
  • Apply offline — bulk-write to powered-off devices (the NFC field powers each tag).

Applying offline pre-fills the configuration from the template — review it, then tap Write to tag.

Applying a template offline — pre-filled, review and write to tag

Share a template​

Open a template and choose Share to produce a QR code or hex string. Anyone can load it back with New → From QR code or New → From hex. Rename and Delete are in the same menu.

Sharing a template as a QR code and hex string