Skip to main content

Zenner Minomess

Website

Zenner Minomess water meter with roller register and wM-Bus marking on the face

Description​

The Minomess water meter is a compact dry-dial meter with a shielded magnetic coupling and a 7-digit roller register. It comes equipped with a wireless M-Bus (wM-Bus) radio module for seamless integration into remote readout systems.

Configuration​

info

The device is delivered pre-configured.

Wireless M-Bus Address Configuration​

Where to Find the Address on the Device​

The address is displayed on the device screen, to the left of the unit m³, as shown in the image below (8 digits).

Minomess dial with the 8-digit wM-Bus address outlined left of the m3 unit on the screen


Mapping the wM-Bus Address to CHESTER​

The mapping must be carried out using the CHESTER Terminal, for example with:


Managing and Adding wM-Bus Device Addresses in CHESTER​

Here you can manage the list of wM-Bus addresses (add/remove), adjust scan settings, and review example configurations for typical setups.


Message Encryption and Key Management​

The transmitted messages are encrypted.

The received data must therefore be decrypted, which is done using decryption keys.
To achieve this, there are two options: