Skip to main content

Zenner C5-ISF

Website

Zenner zelsius C5-ISF thermal energy meter with LCD and brass single-jet flow sensor

Description​

The zelsius C5-ISF is a compact and precise thermal energy meter with a robust single-jet flow sensor. It features a wireless M-Bus (wM-Bus) communication interface for efficient and accurate remote consumption monitoring.

Configuration​

info

The device is delivered pre-configured.

Wireless M-Bus Address Configuration​

Where to Find the Address on the Device​

The address is located in the center below the barcode and consists of the last two groups of four digits, as shown in the image below (8 digits).

C5-ISF with the last two four-digit groups of the serial outlined as the wM-Bus address


Mapping the wM-Bus Address to CHESTER​

The mapping must be carried out using the CHESTER Terminal, for example with:


Managing and Adding wM-Bus Device Addresses in CHESTER​

Here you can manage the list of wM-Bus addresses (add/remove), adjust scan settings, and review example configurations for typical setups.


Message Encryption and Key Management​

The transmitted messages are encrypted.

The received data must therefore be decrypted, which is done using decryption keys.
To achieve this, there are two options: